In-the-field Checklist for all Planters Regardless of Make and Model
While in the field it is recommended that the following periodic
checks be made to ensure the effectiveness of your planter and planting
methods:
- Make sure the closing wheels are adequately closing
the seed trench. The closing wheels require a certain amount
of loose soil in order to effectively close the seed trench.
- Make sure the planter frames and planter units are level with
the soil. This is done while the planter is lowered in its normal
planting position. An unleveled planter can cause one or two
things. First, it may prevent the closing wheels from sufficiently
firming the seed trench. Second, it may force the unit-mounted
coulters too deep into the soil causing them to work soil at
a level below seed placement. This may result in the formation
of air pockets below the seed which may effect the germination
of the seed
To accurately complete these recommended checks, some
soil may need to be removed from the top of the seed trench for
visual verification.
- Make sure there is good soil to seed contact
- Make sure the seed is planted deep enough and in a moist seedbed.
- Make sure residue is not being hairpinned into the seed trench.
Residue that becomes lodged in the seed trench tends to draw
moisture out and away from the seed.
The following trouble-shooting chart will help
you identify the cause and provide possible solutions to common
in-the-field planting problems.
NOTICE - The information contained in this guide is offered
in good faith by Yetter Mfg. Co. to further the understanding of
no-till farming. However, the use of the information provided is
beyond the control of Yetter Mfg. Co. and in no case shall Yetter
Mfg. Co. or any seller of its products be responsible for any damages
which may occur from the use of this information. All such risks
shall be assumed by the user.
Yetter Manufacturing Inc.
PO Box 358 • 109 S. McDonough • Colchester, Illinois 62326 USA
Phone: 309.776.4111• 800.447.5777 FAX: 309.776.3222
E-mail: info@yetterco.com
Copyright © Yetter Manufacturing Inc.
Permission must be obtained in advance
to reproduce content from this site.
Contact Yetter for details.
Staff Access |
